THE ODEN PLUG STYLE NOZZLE IS AN AIR ACTIVATED SANITARY NOZZLE DESIGNED FOR QUICK ASSEMBLY AND DISASSEMBLY AND ACCOMMODATES A WIDE RANGE OF LIQUID PRODUCTS WHICH CONTAIN LARGE PARTICULATE.

THE ODEN PLUG STYLE NOZZLE IS AN EXCLUSIVE ODEN DESIGN

Have you been looking for a nozzle with positive shut-off, quick job change capabilities, easy cleaning, and the versatility to handle a wide range of liquid products which contain large particulate? Oden's Plug Style Positive Shut-Off Nozzle (PSN) may be just the answer.

QUICK ASSEMBLY & DISASSEMBLY

The Oden Plug Style Positive Shut-off Nozzle is an air activated sanitary nozzle designed for quick assembly and disassembly. All fluid contact parts are 316L stainless steel and there are no threads in the fluid contact pathway.

The Oden Plug Style Positive Shut-off Nozzle has a double O-ring sealed circumferential bottom shut-off Teflon plug. This plug style shut-off allows large particulate to pass through the nozzle inlet through the orifice with little to no product damage.

The Plug Style nozzle is encoded so that the full open position is sensed at the nozzle. This ensures that flow starts in a highly repeatable manner from fill to fill, thus providing superior accuracy.

EASIER TO USE

The Oden Bell Style Positive Shut-off Nozzle has a simple, double O-ring seal. O-rings are directly accessible because our unique containment geometry eliminates blind O-ring grooves. There is no need to worry about putting an O-ring in backward because it cannot be done! Standard size O-rings are used so that replacements are inexpensive, readily available, and can accommodate almost any product chemistry.

The Oden Bell Style Positive Shut-off Nozzle uses a hollow rod air cylinder actuator. This means that the operator rod requires no joints or connection to link it to the air cylinder, making the nozzle simpler, easier to clean and much more rugged.

This PSN nozzle system allows simple interchange of fill tube sizes with the same nozzle body. The cost of size changes is therefore limited to one part of the nozzle.